FY series pre-coat glue
automatic thermal laminating machine as a professional equipment used for
plastic
film laminating on the surface of paper printed matter. Improving the
printing matter grades, and achieve
the purpose of dust-proof, waterproof,
oil proof.
Thermal laminating (Pre-coated /thermal film)
Film: OPP, BOPP, PET, SOFT TOUCH FILM.
① Automatic Paper Feeding
Part and Edge Landing Part
The automatic paper feeding part has the
function of paper pre-piling and paper feeding continuously to
guarantee
laminating process continuous and stable, Non-stop paper sheet feeding and
collecting, save
time and improve productivity. Feeder for high speed printing
machine which has stable paper feed and
accurate and simple operation. The paper
edge lap device controlled by servo motor independent, that
accuracy of up to ≤
±2mm.
② Laminator Part
The
large steel hot-press steel roller adopts electromagnetic heating system, rapid
heating, energy saving
and environmental protection. Heating and pressing steel
roller diameter 380mm, Robber roller diameter
300mm ; The inner diameter of the
rubber pressure roller cylinder is enlarged to 63mm, the total maximal
pressure
reaches 10T could be make sure the requirements of high-speed laminating
products’ quality.
③ Cutting part
Cutting part with round (fly) knife device
(Independent research and development by our factory), easy
adjustment. It can
make sure effective cutting for paper more than 105g/m².
Cutter with the anti-roll device, it could
be appropriate to improve the curl phenomenon when the thin
paper to be
pull-breaking. The cutter adopts variable frequency speed control which could
able to
synchronize with the laminator unit part.
④ Paper Collecting Part
The automatic paper collecting part has the
function of collecting paper without shutdown, the collector
size is matched
with the paper feeder.
Model
FY-B800
FY-B1080
FY-B1280
Max. paper size-mm
780X880
1080X1100
1280X1250
Min. paper size-mm
350×270
350×290
350×290
Speed-m/min
10-110
10-110
10-110
Paper thickness-g/m2
80-500
80-500
80-500
Overlap precision-mm
≤±2
≤±2
≤±2
Film thickness (common micrometer)
1005,1006,1206(1508 and 1208 for deep embossing paper)
Non-stop Feeding height-mm
1150
1150
1150
Collector paper height (incl. pallet)-mm
1050
1050
1050
Main motor power-kw
5.5
5.5
5.5
Whole machine power-kw
35
35
35
Working power-kw
25-28
25-28
25-28
Voltage-V
380V-50Hz-3P
380V-50Hz-3P
380V-50Hz-3P
Roll working pressure-Mpa
15
15
15
Air pressure requirement-m3/min
1.0
1.0
1.0
Vacuum pump
80psi
80psi
80psi
Cable thickness-mm2
16
16
16
Weight-kgs
6000/6500
7000/7500
8000/8500
Dimension (layout)-mm2
7000*1900*2100
8100*2200*2100
8500*2400*2100
Loading
20 GP
40 GP
40 GP
1. Equipment
appearance professional industrial design, spray-paint process, Practical and
beautiful.
2. High
quality pneumatic conveying paper feeder with 4 suckers for lifting paper and 4
suckers for conveying paper to ensure stable and fast paper feeding.
3. Paper
conveying plate with customize corrugated stainless steel plate.
4. Automatic
thermal laminating unit, Overlap device is controlled by side pull gauge and
servo motor, ensure accuracy.
The hot
press roller (Dia.380mm) adopts electromagnetic heating system, uniform
temperature, high efficiency and energy saving, it will ensure high quality
products’ film laminating requirements.
5. Automatic
slitting (round knife suitable for OPP, BOPP), with a tension controller,
bouncing function, ensure paper flat and unwinding.
6. Automatic
collector.
7. The electrical
configuration mainly adopts the Taiwan Delta electrical control system and the
French Schneider electric appliance.
8. Auxiliary
cart lifting changing roll film, Single person independent operation.
Welcome to our website. If you have any requests or suggestions,please feel free to email us at sales1@jltmachine.com or use the following enquiry form. Please allow us to provide you with the best service.
